Product Features
This product is made from inorganic acid, strong oxidizer, inhibitor, brightener, ash inhibitor, surface active agent, and so on. Compared with conventional alkaline etching technique, it has the following advantages:
- With the two functions of removing oxidizing and polishing. Treated profiles can be directly oxidized, simplifying pre-oxidation treatment processes.
- Improves profile gloss, useful for stabilizing prime color of colored profiles and for brilliant colors and luster, and has special brightening and whitening effect on sand spray treated profiles.
- Utilizes proper inhibitors and surface active agents, overcomes the short points of aluminum profiles with incomplete solution (e.g. inadequate refining and hardening, serious a liquation of crystal), surface sands and bright crystals, etc.
- Wide technical parameters of tank liquid, with the advantage of low cost, low pollution and simple operation.
Operating Conditions
Low-temp Polishing Agent: 30~50 g/L
Temperature: Room temperature
Time: 1~3min
Solution Control
- In production, add Low-temp Polishing Agent based on production capacity. Under normal condition, production on one ton of aluminum profiles approximately consumes Low-temp Polishing Agent: 3~6kg.
- During operation procedure, try to avoid bringing in too many dirt and foreign matter that pollute tank liquid. Suggest cleaning tank bottom once a month.
Product Packaging
25kg packaged and sealed plastic bag with outer carton.
